Meranie na stavbe bez chýb

2026.11.14 09:00 Receiver, tripod and staff: what you need besides the laser A laser alone is not enough on a construction site. Why you can't see the beam without a receiver outside, what tripod to choose and what a telescopic staff with a millimeter scale is for. Čítať článok →

2026.11.13 09:00 How to check the accuracy of a rotating laser (test between two walls) A simple check that you can do in 15 minutes. We'll show you how to measure the deviation, when the laser is OK, and when it needs to be calibrated. Čítať článok →

2026.11.12 09:00 Sewer and drainage slope: how to set it with a laser What does a 2% slope mean in practice, how to convert it to millimeters, and why a digital laser that maintains the slope in the X and Y axes on its own is worth it for pipes. Čítať článok →

2026.11.11 09:00 Leveling foundations with a rotating laser step by step From the height point to the finished formwork: how to set up a laser, set the receiver on the batten and quickly check the height of the foundations on the entire construction site - even without a helper. Čítať článok →

2026.11.10 09:00 How to choose a rotary laser: 7 questions before buying Red or green beam, basic or complete, classic or digital model? Seven questions to help you know exactly which rotating laser you need. Čítať článok →

2026.11.09 09:00 8 most common mistakes when measuring with a rotating laser Sloped battens, a shifted tripod, a forgotten tilt mode, or a receiver for a different beam color. The mistakes we see most often on construction sites - and how to avoid them. Čítať článok →

2026.11.08 09:00 Caring for your rotary laser: batteries, transport and winter How to charge batteries, clean optics, transport the laser, and work with it in the cold to keep it accurate for years. Čítať článok →

2026.11.07 09:00 Landscaping, terrace and interlocking paving with laser The plane under the lawn, the slope of the terrace from the house and the base for interlocking paving. How to prepare the garden with a rotary laser so that water flows where it should. Čítať článok →

2026.11.06 09:00 Floor and screed leveling with a rotating laser How to mark the floor height throughout the house, install leveling points for the screed, and check flatness - without a hose level and without an assistant. Čítať článok →

2026.11.05 09:00 Rotating or cross laser: when which? A cross laser is enough for tiling and drywall in one room, while a rotary laser can handle the entire construction site, even outdoors. A comparison that will save you from unnecessary purchases. Čítať článok →